加速溶剂同时萃取和净化-气相色谱-三重四极杆串联质谱测定土壤和沉积物中8种多溴联苯醚

建立了土壤和沉积物中8种多溴联苯醚(PBDEs,BDE-28、BDE-47、BDE-99、BDE-100、BDE-153、BDE-154、BDE-183和BDE-209)加速溶剂同时萃取和净化-气相色谱-三重四极杆串联质谱(ASE-GC-MS-MS)的分析方法。通过优化加速溶剂萃取与弗罗里硅土在线净化和串联质谱多反应监测模式的条件,较好地去除基质干扰,并提高了三重四极杆串联质谱定性的准确性及定量的灵敏性。该方法采用改进的色谱柱能同时分析包括高溴代联苯醚BDE-209在内的8种PBDEs,其浓度范围为1～100 ng/mL(BDE-209为10～1 000 ng/mL),线性良好,线性回归系数均大于0.997。方法检出限为0.004～0.1 ng/g,方法回收率为75%～110%,方法精密度为2.4%～15.6%。适于批量处理土壤和沉积物中含有多组分痕量PBDEs的样品。     

Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst

Direct synthesis of dimethyl ether(DME) by CO_2 hydrogenation has been investigated over three hybrid catalysts prepared by different methods:co-precipitation,sol-gel,and solid grinding to produce mixed Cu,ZnO,ZrO_2 catalysts that were physically mixed with a commercial ferrierite(FER) zeolite.The catalysts were characterized by N_2 physisorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),temperature programmed desorption of CO_2(CO_2-TPD),temperature programmed desorption of NH_3(NH_3-TPD),and temperature programmed H2 reduction(H_2-TPR).The results demonstrate that smaller CuO and Cu crystallite sizes resulting in better dispersion of the active phases,higher surface area,and lower reduction temperature are all favorable for catalytic activity.The reaction mechanism has been studied using in situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS).Methanol appears to be formed via the bidentate-formate(b-HCOO) species undergoing stepwise hydrogenation,while DME formation occurs from methanol dehydration and reaction of two surface methoxy groups.     

深圳市龙岗区大气颗粒物中多溴联苯醚的污染特征研究

为了解深圳市龙岗区大气颗粒物中多溴联苯醚的污染状况,于2017年1月、4月、8月和11月分别采集龙岗区大气颗粒物样品.利用气相色谱-质谱联用仪（GC/MS）对深圳市龙岗区4个功能区（工业区、商业区、居民区和生态区）的80个大气颗粒物样品进行检测,得到PBDEs（多溴联苯醚）8种单体（BDE-28、BDE-47、BDE-99、BDE-100、BDE-153、BDE-154、BDE-183、BDE-209）的质量浓度,同时研究了大气颗粒物中PBDEs质量浓度的时空分布特征.结果表明:①深圳市龙岗区大气颗粒物中ρ（∑₈PBDEs）（∑₈PBDEs为PBDEs 8种单体的加和）范围为0.07~77.80 pg/m3,ρ（∑₈PBDEs）年均值为（6.86±14.17）pg/m3.ρ（BDE-209）范围为0.01~76.23 pg/m3,年均值为（5.10±13.58）pg/m3,BDE-209为主要污染单体.② 4个功能区的ρ（∑₈PBDEs）平均值大小顺序依次为工业区（13.65 pg/m3）>商业区（7.75 pg/m3）>生态区（3.95 pg/m3）>居民区（2.19 pg/m3）,工业区是环境空气颗粒物中PBDEs的主要污染区.③ ρ（∑₈PBDEs）平均值的季节性变化规律为春季（13.32 pg/m3）>冬季（9.18 pg/m3）>秋季（2.17 pg/m3）>夏季（1.51 pg/m3）,符合深圳市亚热带海洋季风气温和气候对环境空气中颗粒物质量浓度的影响规律.研究显示,深圳市龙岗区大气颗粒物中PBDEs质量浓度处于较高水平,污染严重,建议减少含PBDEs产品的生产、使用和运输等活动,或找到更利于环境安全和人体健康的替代品,降低PBDEs对该地区的污染.      

GC- M S法测定蔬菜和水果中八氯二丙醚

建立了固相萃取-GC-MS法测定蔬菜和水果中八氯二丙醚残留的方法,样品采用乙腈均质提取,固相萃取柱净化,正己烷定容.优化了试验条件,选择了定性与定量离子,方法线性良好,最低检出限为0.004 7 mg/kg,加标量为0.10 mg/L～1.00 mg/L时,回收率为87.0%～96.0%,RSD＜4.0%.     

萃取-催化氧化光度法测定生物体中H2O2含量研究

提出萃取-催化氧化光度法测定生物体中H2O2含量的新方法.用稀土催化H2O2产生羟基自由基以氧化二苯基碳酰二肼,生成红色二苯基碳酰腙,其最大吸收波长为563.0nm;当二苯基碳酰二肼浓度一定时,△A563与H2O2含量呈量效关系.在0～30μmol/L H2O2 含量范围内,该法能简单、快速、精确地测定生物样品中H2O2实际含量.     

钢铁企业富余煤气制甲醇与二甲醚的研究

利用钢铁联合企业的富余煤气,制甲醇与二甲醚.提出合理可行的工艺方案,进行主要物料消耗计算和成本估算,得出在工艺上和经济上可行的结论.项目的实施,能实现钢铁联合企业资源综合利用,提高企业的经济效益,同时对实现能源的多样化、发展新型清洁能源、改善生态环境都具有重要意义,其经济效益和社会效益显著.     

我国城市污泥中醚类和卤代烃类有机污染物的初步研究

应用GC／MS联机检测技术对我国大陆和香港共11个城市污泥中4种醚类和4种卤代烃类化合物进行分析。结果表明，醚类化合物的总含量在0－7．743mg/kg之间，以双（2－氯异丙基）醚为主，主要分布在兰州污泥和广州污泥中；卤代烃类化合物的总含量在0．007－3．237mg/kg之间，以六氯环戊二烯为主，主要分布在兰州污泥、佛山污泥和沙田（香港）污泥中。污泥中醚类和卤代烃类化合物的种类及其含量与污水来源、污水处理方式、污泥类型、化合物的结构和理化性质等因素有关。     

工程菌处理高纯二甲醚生产废水的研究

工程菌LEY7是以假单胞菌D3 菌株 (Pseudomonassp.D3 )为受体 ,以缓慢牙孢杆菌 3RM2 菌株 (Bacilluslentus 3RM2 ) ,假单胞菌W1 (Pseudomonassp .W1 )和W2 (Pseudomonassp .W2 )为供体 ,用多基因转化原生质球构建而成。工程菌LEY7能同时降解 4种化合物。用工程菌LEY7处理化工废水 ,工艺采用二级氧化。处理效果 :进水COD =10 0 0mg/L ,处理后出水COD在 10 0mg/L以下。COD去除率达到 90 %以上。     

A comparative study on the autoxidation of dimethyl ether (DME) comparison with diethyl ether (DEE) and diisopropyl ether (DIPE)

The Japanese government is planning to introduce DME as a substituted energy for oil and LNG. Introduction of DME could contribute greatly to both the prevention of global warming and the formation of resource-recycling societies. In these circumstances, a safety assessment of DME is very important when DME is used on a large scale. There is a possibility that prolonged exposure in air induces autoxidation to produce explosive organic peroxides during transportation and storage of DME. Therefore, the reactivity of DME with oxygen and the mechanism of the autoxidation were investigated. Accelerating Rate Calorimetry (ARC) was used to evaluate the thermal stability of DME and DIPE, a known peroxide producers, under adiabatic and various atmospheric conditions. In ARC studies of DME under oxygen, exothermic decompositions were detected although its self-heating rate was low in comparison with DIPE. Oven storage tests were carried out and iodimetry was used to measure the concentration of peroxides produced from DME in comparison with DIPE and DEE. However, no products could be found for DME either by GC/MS or by iodimetry, while some evidence of autoxidation of both DEE and DIPE were obtained from these experiments.     

Flammability limits of binary mixtures of dimethyl ether with five diluent gases

Flammability limits of binary mixtures of dimethyl ether with five kinds of diluent gases were measured by ASHRAE method at room temperature. The five diluent gases are nitrogen, carbon dioxide, chlorodifluoromethane (HCFC-22), 1,1,1,2-tetrafluoroethane (HFC-134a) and 1,1,1,2,3,3,3-heptafluoropropane (HFC-227ea). The experimental results were correlated with the extended Le Chatelier's formula. It was found that the experimental results were well reproduced by the formula. In addition, flammability limits of binary mixtures of dimethyl ether with nitrogen and carbon dioxide were compared with the estimated values based on the adiabatic flame temperature method. The experimental results were found to be in satisfactory agreement with the estimated values.